HD4112se Quad HD MPEG2 DVBT Modulator
Business Type : Manufacturer, Supplier
- This HD Encoder Modulator supports
- 4 HDMI inputs, and 1 F (4 RF) female output .
- After encoding and modulation, the input signal appears
- on 4 x RF carriers at the RF output.
- This modulator has NO FRONT LCD and is controlled only by WEB GUI.
Features:
- 4 HDMI inputs
- 4 RF carriers out
- HDCP compliant
- WEB GUI Control
- Rack Mountable
- 1080p resolution
- ONID, NID, LCN and TSID Adjustable
- Service ID and PIDs Adjustable
- Encoding Bitrate Adjustable
- Modulation Parameters Adjustable
- Firmware upgradeable via Ethernet Port
- Rack position for multiple unit installation.
- 2 cooling Fans Built in
- 4 x HDMI leads provided
- MPEG2 -Works on MPEG2 and MPEG4 TVs, IQ2, 3 and 4 tested.
Stream/Encoder
- PMT PID/Video PID/Audio PID/PCR PID/TS ID/ Service ID/
- ON ID/ Network ID/Service provider/Network Neme/Min
- Bitrate/Max Bitrate/Audio Encoder/FHD Output
- Network: IP Address/Subnet Mask/Default Gateway/MAC Address
- Update: Controller Firmware/Modulator Firmware/Main MCU
Modulator Section
- MER >35dB
- RF range: 100 to 950MHz in1KHz steps
- RF output level: 100dBμV(25dB Attenuation)
- Standard: DVB-T
- Bandwidth: 6M, 7M, 8M
- Constellation: QPSK, 16QAM, 64QAM
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Guard interval: 1/4, 1/8, 1/16, 1/32
- FFT: 2K, 8K
View
